 |
Keep the ultrasonic plastic welding equipment clean, tidy, well lubricated, and operate safely. Including the timely tightening of loose fasteners, adjustment of the clearance of movable parts, etc. That is "clean, lubricate, Fastening, adjustment, anti-corrosion" cross operation method. Practice ... Read More
|
| |
When it comes to plastic, everyone is familiar with it. From children's toys to instrument containers, from computer casings to car parts, from toothbrushing tubes to airplane parts, plastic products can be seen everywhere in our lives. The English name of plastic "plastic" comes from the Greek word ... Read More
|
| |
The reason why ultrasonic molds are easy to crack is mainly caused by two major aspects: mold design and material selection, and learn the knowledge of ultrasonic welding together. First: The design of the ultrasonic mold is not reasonable enough, and the production is not precise enough. The ... Read More
|
| |
1. Get out of the misunderstandings of ultrasonic welding: how to use the oscillation frequency, output power, amplitude range, etc., should be determined according to factors such as the area of the welding wire of the workpiece, the material, whether there are airtight electrons in the workpiece... Read More
|
| |
1. Equipment start-up time Due to the need for a narrow blade design, the design and manufacture of ultrasonic cutting tool heads are challenging. Vibrating the cutter head at maximum amplitude under no load can sometimes cause premature damage to the cutter head. Therefore, the signal from the ... Read More
|
| |
The ultrasonic food cutter contains the following components 1. Ultrasonic generator (power supply) The ultrasonic generator converts the power current of 110VAC or 220VAC into high frequency and high voltage electric signal. 2. Ultrasonic converter (transducer) The ultrasonic transducer uses the ... Read More
|
| |
Food ultrasonic cutting knife uses advanced ultrasonic technology to make the knife body produce high-frequency vibration when cutting food, cut the food, and in the process of high-frequency vibration, there will be no food residue on the knife body, and the cut is neat and smooth , The cut food is ... Read More
|
| |
In the cutting process, we often encounter many problems, such as the accuracy of cutting, the stability of the physical properties of the final product, the smoothness of the cutting surface, the ease of separation of the tool and the material, and the surface of the tool and the connection with ... Read More
|
| |
For products with small batches, multiple varieties, large volumes or quality, a simple ultrasonic welding robot workstation or a robot workstation combined with an ultrasonic welding positioner and a robot can be used according to the spatial distribution of the welds of the workpiece. It is ... Read More
|
| |
When working with ultrasonic, as long as the product and the mold surface are contacted accurately, the welding effect can be obtained. In fact, this is only a superficial view. Since the ultrasonic is frictional vibration, it will produce the phenomenon of sound wave transmission. If we only ... Read More
|
