Keep the ultrasonic plastic welding equipment clean, tidy, well lubricated, and operate safely. Including the timely tightening of loose fasteners, adjustment of the clearance of movable parts, etc. That is "clean, lubricate,
Fastening, adjustment, anti-corrosion" cross operation method. Practice has proved that the service life of the equipment depends largely on the daily maintenance of the ultrasonic welding machine.
Maintenance is divided into daily maintenance, primary maintenance, secondary maintenance and tertiary maintenance according to the size and difficulty of the workload.
Daily maintenance: also known as routine maintenance, the main content is to clean, lubricate, fasten loose parts, and check the integrity of parts. This type of maintenance is mostly on the outside of the equipment.
First-level maintenance: The main content is general tightening, cleaning, lubrication, and tightening, some of which need to be adjusted. Daily maintenance and primary maintenance can be completed by front-line operators.
Secondary maintenance: The main content is internal cleaning, lubrication, partial disintegration inspection and adjustment.
Three-level maintenance: mainly to inspect and adjust the main part of the equipment, and replace parts that reach the specified wear limit when necessary. In addition, the
Wear conditions are measured, identified and recorded. The second-level maintenance and the third-level maintenance need to be completed by operators under professional training.
Contact Person: Ms. Hogo Lv
Tel: 0086-15158107730
Fax: 86-571-88635972