|
Product Details:
|
| Frequency: | 50Khz | Power: | 30w |
|---|---|---|---|
| Power Consumption: | 0.01 Degrees/kg | Max Atomization Speed: | 5L/H |
| Atomization Volume: | 28um | Spray Nozzle Shape: | Long Nozzle |
| Material: | Titanium | Origin: | China |
| High Light: | 50kHz Ultrasonic Atomizer Nozzle,5L/H Ultrasonic Atomizer Nozzle,Uniform Ultrasonic Atomizer Nozzle |
||
50kHz Ultrasonic Atomizer Nozzle Efficient And Uniform Reliable
Applications :
· increase air humidity
· Coating on non-woven fabrics
· Factory laboratory spray drying
· Inject moisture into the airflow
· Fully inject the reagents into the reaction
Advantages:
Generally atomized liquids (oil or water) use pressure atomizing nozzles (centrifugal nozzles). When the liquid flow rate is too large (or the liquid viscosity is too large), due to the increase of the nozzle size of the centrifugal nozzle and the increase of the liquid film at the nozzle outlet, the liquid atomization quality is deteriorated, and the average Sotel diameter (dS, m) of the liquid droplets increases sharply . In order to obtain the ideal atomization quality when the liquid flow rate is large, compressed air (or steam) can be used as the atomizing agent to improve the atomization quality. The pressure of the atomizer is generally 013~015MPa, such as Y-type nozzles, internal mixing nozzles and external mixing nozzles. Since the Y-type, internal mixing and external mixing nozzles only use the aerodynamic energy of the atomizing agent to atomize the liquid, the required atomizing dose is relatively large. 30%~60% of the mass of the atomized liquid.
Parameters:
Frequency:50Khz
Power:30w
Power Consumption:0.01 Degrees/kg
Max Atomization speed:5L/H
Atomization Volume:28um
Spray Nozzle Shape:Long nozzle
Atomization Head Structure:Cylindrical,Mushroom,cone...
Picture:
Shipping:
Payment:
General FAQs
Q: Are you trading company or manufacturer ?
A: We are a factory with our own international business department,.Also welcome customer visit our company for experiment.
Q: Is the ultrasonic frequency will influence the average particle diameter?
A: Yes, general speaking, If the ultrasonic frequency is higher, the particle will smaller.
Q: Can customized, modify,develop products according to the drawing?
A: Yes, we provide OEM service, we can customized products according to the drawings?
Q: When can we get the reply ?
A: Any inquires will be replied with 24hours.Our sales team will try our best to support you,and welcome to call us if you have any question or immediate support .
Contact Person: Hogo Lv
Tel: 0086-15158107730
Fax: 86-571-88635972
