Product Details:
|
Frequency: | 40Khz | Power: | 100W |
---|---|---|---|
Knife: | Replaceable | ||
Highlight: | ultrasonic cutting knife,ultrasonic cutting devices |
40 Khz Ultrasonic Cutting Knife For 0.01~3mm PC Foils , High Efficiency
Description:
Ultrasonic Cutting Machine is a class of device using ultrasonic energy for cutting. Instead of using traditional blade cutting,
ultrasonic cutting has its advantages of smooth, reliable cutting, accurate trimming, no deformation, no raising, fuzzing, spinning,
wrinkling etc. It can avoid the rough cutting-edge, coked edge, fuzzballs and other shortcomings of laser cutting machine.
Ultrasonic cutting machine is used for cutting rubber, synthetic fabric, cloth, plastic, sheet metal, food etc.
The cutting of food products using ultrasound is performed when an ultrasonic blade comes into contact with the product to be cut,
the high vibration of 40,000 pulses per second, makes this product very easily be cut even if it is of delicate or sticky texture composition.
The much higher vibration does not allow any product to stick to the blade. The cut is clean and without pressure on the product.
Specification:
Model |
HSQ40B-AB |
Frequency |
40KHZ |
Output Power |
100W |
Generator |
Analog generator, 155 x 265 x 170mm |
Handle |
Φ32×170 |
Size of cutter |
Blade replaceable |
Length of cable |
3M |
Outer skin |
Aluminum |
Weight |
8KG |
Voltage |
220V / 110V |
Accessory |
Foot switch1pc; |
Material of cutter |
Magnalium alloy, titanium alloy, stainless steel |
TYPICAL MATERIALS PROCESSED
Competitive Advantage:
★ The use of high power ultrasonic transducer vibrating element, ensure the long time stable working
★ The cutting speed is improved greatly, the efficiency 10 times higher than the traditional cutting knife.
★ Cutting all kinds of ordinary tool to cut products, solve production problems
★ Can be installed high hardness blade, cutting blade can be replaced, greatly reducing the use cost
★ Cutting tool complete varieties, can also be customized according to customer process shaped cutting
tool
★ Installation, easy to use, almost does not change the original cutting process
★ Can be used in the production of circular ultrasonic tool cutting equipment, rolling cutting, suitable
for cutting special
★ Can use air-cooled, water-cooled design, adapt to various working conditions and environment
Problem and solution:
Item |
Problem |
Cause description |
Solution |
|
Power switch to “I” the light is out |
Power plug loose |
Plugging in |
Power line break |
Fix it yourself or send back |
||
Power switch bad contact |
|||
Fuse is broken |
|||
Power light and running light are OK |
Air plug and socket not connected |
Tighten the connection position |
|
Handle have abnormal Sound |
Clean the card slot, use new blade |
||
Intermittently use, but the handle keeping hot |
Please send it back |
||
Out-put air plug break |
|||
Screw loose |
Tighten the screw |
||
Running light is ok |
Running switch bad |
Please send it back |
Contact Person: Ms. Hogo Lv
Tel: 0086-15158107730
Fax: 86-571-88635972