In modern vehicles, whether it is exterior decorative parts (such as bumpers, fenders, wheel covers, deflectors, etc.), interior decorative parts (such as instrument panels, door inner panels, sub-dashboards, glove compartment covers, seats) Chairs, rear guards, etc.), or functional and structural ... Read More
|
Working Principle of Ultrasonic Machining The figure shows the Ultrasonic machining operation. The electronic oscillator and amplifier, also known as the generator, converts the available electrical energy of low frequency to high-frequency power of the order of 20 kHz which is supplied to the ... Read More
|
Traditional cutter: 1. Need sharp cutting edges to increase the requirements for blades; 2. Cloth cutting cannot be edge-sealed. Cutting edges easily cause chipping and damage; 3. Sticky objects are difficult to cut, and it is easy to stick the knife, affecting the cutting effect and efficiency; 4. ... Read More
|
Principle: (1) Laser cutting principle: The principle of laser cutting Laser cutting is to use a focused high-power density laser beam to irradiate the workpiece, so that the irradiated material quickly melts, vaporizes, ablates or reaches the ignition point, and at the same time blows out the ... Read More
|
With the rapid development of science and technology, the manufacturing process is also constantly innovating. Today I will introduce the ultrasonic plastic welding machine, which we generally call the ultrasonic plastic welding machine. The ultrasonic plastic welding machine is easier to operate ... Read More
|
Compared with traditional two-fluid spraying, ultrasonic spraying has the advantages of high coating uniformity, high raw material utilization, high coating thickness control accuracy, thinner coating thickness, less splash, no clogging of nozzles, and low maintenance costs. Compared with vacuum ... Read More
|
The ultrasonic accessories in the non-woven mask machine are composed of an ultrasonic generator (ultrasonic power supply), an ultrasonic transducer, an ultrasonic welding horn, and a flange. It is the core welding part of the mask machine, which is used for welding around the mask, the bridge of ... Read More
|
The ultrasonic system of the mask machine includes: generator, vibrator (transducer + booster), welding horn, flange, etc. Ultrasonic generator is divided into automatic frequency tracking circuit and manual frequency modulation circuit. Experienced tuning personnel can choose manual frequency ... Read More
|
The application of ultrasonic homogenizer is as follows: 1. Breaking up of cells, bacteria, viruses, spores, fungi, or tissues 2. Extraction of ingredients 3. Homogenization of substances of all kinds 4. Production of the finest emulsions with minimal droplet size 5. Dissolution of hard-to-dissolve ... Read More
|
The disintegration of cell structures (lysis) by means of ultrasound is used for the extraction of intra-cellular compounds or for the microbial inactivation. Background In microbiology, ultrasound is primarily associated with cell disruption (lysis) or disintegration (Allinger 1975). When ... Read More
|