 |
Introduction to ultrasonic sonochemical equipment: When ultrasonic waves propagate through a liquid medium, they produce mechanical, thermal, optical, electrical, and chemical effects through mechanical action, cavitation, and heat. High-powered ultrasonic waves produce intense cavitation, which ... Read More
|
| |
Ultrasonic atomization uses electronic high-frequency oscillation (oscillation frequency is 1.7MHz or 2.4MHz, which exceeds the human hearing range, the electronic oscillation does not harm the human body and animals), and the liquid water is passed through the high-frequency resonance of the ... Read More
|
| |
Description: Ultrasonic extraction uses ultrasonic extraction machine to increase the molecular motion frequency of substances by using the strong cavitation effect, mechanical vibration, disturbance effect, high acceleration, emulsification, diffusion, crushing and stirring effects generated by ... Read More
|
| |
High power sine wave generator This unit converts low frequency (60 Hz) electrical power to high frequency (20kHz) electrical power. Transducer The high frequency electrical signal is transmitted to traducer which converts it into high frequency low amplitude vibration. Essentially transducer ... Read More
|
| |
Tighten the set-screw in the cone. Clean the contact surface on both sides, transducer-cone and horn. Apply a drop of machine oil on both sides. Screw the horn onto the transducer-cone and tighten it with the provided tools. Set-up and adjusting of the feed-tray (The water thank is not supplied) ... Read More
|
| |
Ultrasound has always been a part of mother nature’s solutions. Bats use it in particular to orient themselves and to fly. By emitting brief ultrasound pulses of less than 1/1000 s duration at a frequency of 50,000 Hertz, they can locate obstacles, but also find the insects on which they feed. ... Read More
|
| |
What is Ultrasonic Spot Welding? It is a process where materials are joined at certain points with no specific joint designed on its interface. It is used in micro-joining of metal or plastic products to multiple parts, such as metal sheets of complex forms. This is also used in soldering, metal ... Read More
|
| |
The very first thing that comes to mind when you think about joining two or more components together is a common screw or a mixture of bolts and nuts. Although this is easy to perform, it can add costs and complexity to a manufacturing process that might not be necessary. A simplified solution is ... Read More
|
| |
In theory, the ultrasonic metal welding machine is mainly applied to copper, aluminum, tin, nickel, gold, silver, molybdenum, stainless steel and other non-ferrous metal materials such as thin plates, thin rods, wires, sheets, belts and other materials for instant welding, the total thickness can be ... Read More
|
| |
Ultrasonic application involved the assembly of daytime running lights. A clear plastic lens had to be welded to a plastic body with a hermetic seal. The complex 3D shape and class A surface were a challenge to weld. The customer also needed a cost-efficient system that could accommodate many ... Read More
|
