Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
—— Peter
—— Vinay
—— Alvin
—— Cameron
In theory, the ultrasonic metal welding machine is mainly suitable for instant welding of copper, aluminum, tin, nickel, gold, silver, molybdenum, stainless steel and other non-ferrous metal materials such as thin plates, thin rods, wires, sheets, and ribbons. The total thickness can be Up to 2-4mm. However, in fact, some hard metals cannot be welded by many ultrasonic welding machine manufacturers at all. For example, materials such as gold and stainless steel cannot be welded by current ultrasonic metal welding machines. Therefore, if there is such a material that needs to be welded, the ultrasonic metal welding machine can be ignored.
Ultrasonic metal welding
The most common welding materials for ultrasonic metal welding machines are soft titanium metals such as copper, aluminum, nickel, and silver. However, for these materials, the welding area is also required, too large, too thick will not work. The advantages of ultrasonic metal welding machine are that it is fast, energy-saving, high fusion strength, good electrical conductivity, no sparks, close to cold processing, and the welding effect is just right, which can make you very satisfied. Of course, the welding material must not exceed the standard, and it is definitely not guaranteed to be too large or thick. In addition, tin plating on the surface of the copper sheet will affect the welding effect.