The greater the power of the ultrasonic welding machine, the better?
The greater the power of the ultrasonic welding machine, the better? The answer is no. This problem needs to be determined according to the welding requirements of the product. It mainly depends on the size of the workpiece and the welding effect, not the bigger the better. The power of the ultrasonic plastic welding machine is 500W-5000W. How should we choose? How much power is the appropriate ultrasonic plastic welding machine to buy?
Although the ultrasonic welding machine has high power, the welding time is much shorter and the work efficiency will be improved, but this is just a sign.
The transducer of the high-power ultrasonic plastic welding machine is larger in size and weight, and the fixed installation machinery is also larger. The cylinder diameter must be larger, which directly affects the up and down speed of the machine. It can be seen that the time for welding the finished product is also here.
When welding plastic products, the welding is not firm and the product is damaged internally. Most of the reasons for poor welding are insufficient ultrasonic power, and the product size is too large. A large ultrasonic mold needs to be made, and the power of the machine is low, which will lead to weak welding.
The common solution to damage internal parts is to replace a different frequency, low-power ultrasonic welding machine, which will also reduce the amplitude of the mold and weaken the power of the ultrasonic.
The above analysis shows that the power of the ultrasonic welding machine is closely related to the demand of the product itself. When choosing and purchasing an ultrasonic welding machine, the cost factor should also be considered. The power is related to the price of ultrasonic welding. Choosing the right type of machine can avoid the use of small and large materials.
Contact Person: Ms. Hogo Lv
Tel: 0086-15158107730
Fax: 86-571-88635972