How to detect the quality of ultrasonic transducers?
It can be distinguished from the manufacturing process and appearance of the ultrasonic transducer; the ultrasonic transducer indirectly shows that the company pays attention to the quality of the product, and the quality of production and quality will naturally be better (but not relatively). Moreover, the design process indirectly affects the quality of production.
It can be distinguished from the manufacturing process and appearance of the ultrasonic transducer; the ultrasonic transducer indirectly shows that the company pays attention to the quality of the product. The quality of production and quality will naturally be better if the process and appearance are good (but not relatively). Moreover, the design process indirectly affects the quality of production.
it can be identified based on the process design and application data of the ultrasonic transducer; but this requires a good understanding of the transducer data and rich experience. Whether the design is reasonable or not should be determined based on the selected materials. The quality of the materials indirectly affects the quality of the product. The data of the same specifications are not the same in the place of origin, and the quality is also very different. No matter how bad the data is, the best technology will make a good product.
Parameter testing; testing whether the parameters of the ultrasonic transducer can be matched with the parameters of the electric box, and whether the desired effect can be achieved.
4. Computer experiment:
1-Power input experiment: This method can detect the mating condition of the transducer and the electric box, and at the same time, it can reflect the size of the electric box and the load power input of the transducer. The greater the effect of the mold The better to clarify the stronger the power input. (The current can only reflect the input efficiency, not the power of the device)
2-Volatility test (imitating the aging test): Bring the additional load of the equipment to detect the power input volatility of the electric box and the transducer.
3-Overload operation test: Test the fluctuation and life of production quality. This test only needs to bring additional load and continue to operate for 8 hours without continuous operation.
Contact Person: Ms. Hogo Lv
Tel: 0086-15158107730
Fax: 86-571-88635972