company news about Accurate control time Ultrasonic solar metal seam welding system

The whole structure principle of ultrasonic metal seam welding machine

Solar metal seam welding uses ultrasonic metal welding technology

Ultrasonic generator + continuous rolling welding tool head (welding head)

Copper and aluminum pipe clamping die, the fixture can be adapted to different sizes of copper or aluminum pipes; copper sheet or aluminum sheet pressing device; pneumatic device for tool head (welding head) lowering; servo*** control system (control motor transverse +Rotation of the welding head. High-frequency vibration is emitted through the ultrasonic system, and a certain pressure is applied through the cylinder to transmit the ultrasonic to the two objects to be welded to achieve the welding effect.

Competitive Advantage

1. Fast Heating: The minimum rate of heating is less than one second(rate of heating is available for adjustment and control)
2. Wide Coverage of Heating: It can be used to heat various metal parts (replace removable induction coil as per different shape).
3. Easy Installation: It can be used once it is connected with power source, induction coil as well as water supply pipe and rising pipe; it is small in size and light in weight.
4. Easy Operation: You can learn to operate it within several minutes.
5. Fast start-up: It can be started to perform heating operation on condition that water and power supply is available.
6. Low Power Consumption: As compared with conventional vacuum tube high frequency equipments, it can save the power by approximately 70%. The smaller the size of the work pieces, the lower power consumption would be.

Equipment Description of Ultrasonic Welding Machine for Solar Collecting Plate

The special welding machine for solar collectors uses high-frequency vibration waves to be transmitted to two metal surfaces to be welded. Under pressure, the two metal surfaces are rubbed against each other to form a fusion between molecular layers. It is undoubtedly an ideal welding system for the metal materials used in solar collectors. Install the ultrasonic seam welding system on the equipment gantry, the seam welding system moves in the X-axis direction on the gantry, and the worktable under the gantry moves in the Y-axis direction to complete the welding of products with a width of 1-2 meters. The solar collector plate welding machine is dedicated to the welding of solar collector plates. It can also be used for solar collectors, amorphous silicon solar panels, copper plate and copper pipe welding, aluminum plate and copper pipe welding, aluminum-plastic composite pipe after trimming , Copper and aluminum welding of heating tubes of electric heating appliances, aluminum corrugated plate processing, copper and aluminum plate splicing, etc.