CE Smooth Portable Ultrasonic Cutter For Fiber 30khz 500w

2022 CE Smooth Portable 30khz 500w Ultrasonic Cutting Machine For Fiber

Specification:

This ultrasonic machine uses ultrasonic energy to heat and melt the material to be cut locally, so as to achieve the purpose of cutting the material. Therefore, ultrasonic cutting does not require a sharp edge, nor does it require a lot of pressure, and will not cause chipping or damage to the material being cut. At the same time, because the cutting knife is doing ultrasonic vibration, the friction resistance is very small, and the material to be cut is not easy to stick to the blade. This is particularly effective for viscous and elastic materials, frozen materials, such as food, rubber materials, and objects that are inconvenient to apply pressure.

30K ultrasonic multi-function handheld cutter applies to:

• Natural fibers
• Synthetic fiber
• Thin plastic products(Such as plastic film, cell phone case)
• All types of paper, bottom film
• Rubber, silicone
• Repair of printed circuit board copper foil
• ABS,PP,PE … other organic plastic sheet less than 2mm
• Various types of synthetic fabrics
• 30K ultrasonic cutting knife can be used for hand-held cutting and automatic mechanical clamping.

Advantages of Ultrasonic Cutting Materials

1. Ultrasonic vibration dramatically reduces resistance during cutting, realizing the best sharpness.

2. Cutting surface finish is good, good bonding performance.

3. It is possible to cut and deburr the hard material and the thick material by the high power specification than before.

4. Fast, high efficiency, no pollution.

5. Even with high power, due to its compact unit structure, it is easy to install in automatic machines and robots.

6. Adopt replacement type knife to reduce running cost

Tag:ultrasoniccutting machine,ultrasonic fiber cutting