Ultrasonic Metal Welding Machine Just Like Women Must Pay Attention to Maintenance
- The chain in the ultrasonic metal welding machine is easy to wear and tear, at least once a year for inspection, timely processing.
- The movement flexibility and reliability of each switch of ultrasonic metal welding machine should be checked frequently to avoid loosening and damage.
- Ultrasonic metal welding electric plugs should be frequently inspected to keep the connection strong and the insertion reliable.
- The dust in the controller and operator of ultrasonic metal welding machine should be blown by compressed air once every three months.
- Electrical appliances, knobs and switches should be checked regularly to keep ultrasonic metal welding machine clean and good contact, so as not to wrong operate.
- The moving parts of each guide rail, sliding frame, screw bar and nut of ultrasonic metal welding machine shall be checked and cleaned frequently to prevent the flexible movement of moving parts caused by dust accumulation.
- The joint surface of each sliding guide rail of ultrasonic metal welding machine is not allowed to collide and wear.The screw, rack and other key moving parts should be constantly checked to avoid wear and tear.
- Lubricating grease shall be applied to all moving parts, guide rails and rollers of ultrasonic metal welding machine, and lubricating oil shall be applied to the closed driving parts to keep the parts moving flexibly.The key is to maintain the parts of the flat and eccentric wheels, to ensure their fastening, to ensure the horizontal arm motion is straight.
Find a precise ultrasonic coating solution?
Click Altrasonic Technology to realize it