Home News

company news about How To Install The Ultrasonic Transducer?

Certification
China Hangzhou Altrasonic Technology Co., Ltd certification
Customer Reviews
The converters corresponding to your INVOICE NO. HS2015021 work very well. We would like to order more

—— Peter

I'm very happy with your good communication skills as well as follow up and good deal. I will definitely inform you my further program for further coo

—— Vinay

We tested it and it worked.  I will let you know about future purchases soon.

—— Alvin

Thank you! It is a pleasure, to work with a company that wants to make it right for the customer :) many times i deal with Chinese companies that do not care about the customer and long term business. I think I made the right decision going with you and Altrasonic !!!

—— Cameron

I'm Online Chat Now
Company News
How To Install The Ultrasonic Transducer?
Latest company news about How To Install The Ultrasonic Transducer?

What is an ultrasonic transducer? It actually converts the input electrical power into mechanical power and then transmits it, and consumes very little power. For the ultrasonic transducer, what are the specific steps in the installation and use process?

 

1. Installation preparation

 

Manufacturers of high-precision plastic welders indicate that all the ultrasonic vibrators to be installed are properly prepared, as well as special glue, power cords, ultrasonic cleaners and other objects that are needed for bonding.

 

2. Pre-treatment of sandblasting

 

The part where the ultrasonic vibrator is installed in the ultrasonic cleaning machine must be sandblasted to make the surface of the stainless steel plate feel rough, to ensure that the ultrasonic vibrator and the surface of the steel plate can be tightly bonded, and the surface of the ultrasonic vibrator in contact with the steel plate must also be sandblasted.

 

3. Clean after sandblasting

 

After the stainless steel plate and the surface of the ultrasonic vibrator are sandblasted, the sand and dust on the surface of the ultrasonic vibrator can be wiped clean with wood alcohol solution, and then rinsed with the Asiton solution.

 

4. Dry after washing

 

The cleaned ultrasonic vibrator, stainless steel plate, steel wire mesh, and rubber pad must be dried with hot air. When the surface temperature of all objects drops to normal temperature, the next bonding work can be carried out.

 

5. Bonding process

 

The manufacturer of the portable spot welder indicated that the surface of the stainless steel plate was wiped dry with Asiton solution.

Pub Time : 2020-12-09 09:09:55 >> News list
Contact Details
Hangzhou Altrasonic Technology Co., Ltd

Contact Person: Ms. Hogo Lv

Tel: 0086-15158107730

Fax: 86-571-88635972

Send your inquiry directly to us (0 / 3000)