Home News

company news about How to control the minimum required amplitude in ultrasonic welding

Certification
China Hangzhou Altrasonic Technology Co., Ltd certification
Customer Reviews
The converters corresponding to your INVOICE NO. HS2015021 work very well. We would like to order more

—— Peter

I'm very happy with your good communication skills as well as follow up and good deal. I will definitely inform you my further program for further coo

—— Vinay

We tested it and it worked.  I will let you know about future purchases soon.

—— Alvin

Thank you! It is a pleasure, to work with a company that wants to make it right for the customer :) many times i deal with Chinese companies that do not care about the customer and long term business. I think I made the right decision going with you and Altrasonic !!!

—— Cameron

I'm Online Chat Now
Company News
How to control the minimum required amplitude in ultrasonic welding
Latest company news about How to control the minimum required amplitude in ultrasonic welding

Ultrasonic welding is one of the common plastic welding processes in the industry. The three most important parameters of this process: amplitude, duration (welding time) and force (welding pressure). Welding time and pressure are parameters that are easy to adjust later in the process development. The amplitude is often determined in the early stage of development and difficult to change in the later stage, so a suitable amplitude must be designed in advance.

 

A typical welding head design method is: under the condition of lower than the material fatigue limit stress, the larger the welding head design transformation ratio, the better (that is, the larger the output amplitude, the better). If you need to reduce the amplitude, replace the amplitude modulator with a smaller ratio or adjust the voltage to reduce the amplitude.

 

How to control the minimum amplitude required:
1. It is impossible to evenly distribute the transformation ratio, that is, the transformation ratio of the welding head and the amplitude modulator are very different. It should be noted that when the welding head and the amplitude modulator have a close ratio, the performance of the ultrasonic triplet (transducer + amplitude modulator + welding head) will be improved.
2. Reduce the welding head transformation ratio by changing the voltage, and at the same time reduce the maximum power output by the electric box. For example, when the amplitude is set to 50%, an electric box with an original output power of 2400W will actually output 1200W. It is easy to cause overload.
3. Using large amplitude will cause unacceptable damage to parts. For example, cracks in a small cross-sectional area may cause burns in appearance, and may cause damage to membranes, filter membranes and electronic components.
Due to the above reasons, it is very important to define th

Pub Time : 2021-02-24 08:37:16 >> News list
Contact Details
Hangzhou Altrasonic Technology Co., Ltd

Contact Person: Ms. Hogo Lv

Tel: 0086-15158107730

Fax: 86-571-88635972

Send your inquiry directly to us (0 / 3000)