Ultrasonic cutting knife is the use of wave energy for cutting processing of a kind of equipment, its characteristics is cutting without cutting edge. In other words, without the traditional cutting edge. Traditional cutting uses a knife with a sharp edge to press against the material being cut. The pressure is concentrated on the edge, and the pressure is very large, exceeding the shear strength of the material to be cut. The molecular bond of the material is pulled open, and it is cut off. Because the material is hard to pull open by strong pressure, so the cutting tool edge should be very sharp, the material itself should also bear relatively large pressure. For soft, elastic material cutting effect is not good, more difficult to viscous materials.
Ultrasonic cutting also has a great advantage, that is, it is in the cutting at the same time, there is fusion in the cutting part. The cutting area is hemmed to prevent loosening of the structure of the material to be cut (e.g. flaps of textile material).
· 1, high cutting precision, material shape remains the same.
· 2, easy for automated production assembly
· 3, good cutting surface finish, good bonding performance.
· 4, high speed, high efficiency and no pollution.
· 5, cutting parts using handheld design, compact, good appearance, easy operation, can change different specifications and different material cutting knife, to achieve the ideal cutting equipment;
· 6, domestic takes the lead in using DSP chip as the core of digital circuit structure, constant current regulation and frequency are controlled by DSP, the system frequency size can be set;
· 7, ultrasonic cutting machine design by hand-held cutting, replaceable different specifications cutting knife mold, ease of use;
· 8, with detuning automatic fast resonance function module, a continuous working time can reach more than 18 hours long, and don't need to go extra cold conditions;
· 9, the company independent research and development of ultrasonic power, can use product performance to provide 50, prolong the service life of the transducer more than double;
· 10, ultrasonic vibration to reduce the friction resistance between the blades and food, it makes the blade cut very smooth, reduce the food in the process of cutting to pieces, improve production efficiency;
· 11, using a handle vibration, the operation simple and silent when cutting, no vibration, cutting and light effect;
· 12, with 40 KHZ or 20 KHZ high frequency vibration, low friction smooth cutting knife to cut food, so food cutting surface clean, beautiful, deformation;
· 13, either single hand use, also can be installed on the machine with a computer controlled cutting head, a fully automatic cutting equipment, used for assembly line of bulk material cutting.
Contact Person: Ms. Hogo Lv