Payment & Shipping Terms:
|Product Name:||Ultrasonic System For Mask Making||Frequency:||20k|
Full Automatic disposal surgical mask making machine
The fully automatic one-to-one mask machine is connected with a mask machine and a conveying device. After being connected to the earband dissolving machine through the conveying device, the mask body machine will produce the product and then convey it to the conveyer after the machine starts On the device, the mask is transferred from the transfer device to the earband welding machine to weld the earband part to complete a complete mask finished product. The entire process realizes a fully automated production process without manual operation.
Functions and features :
1. Integrated production of equipment, automatic operation of the whole machine. Simple and fast, this machine can be operated by one person;
2. Production process: 3-5 layers of material roll on the machine-ultrasonic welding peripheral-rolling cutting-punching breathing valve hole-folding-welding at the second station-rolling out the body-automatic turning The film is delivered to the earband machine-the left and right earbands are welded-the finished product is output.
3, small size does not take up space, with aluminum alloy structure, beautiful and strong;
4. All parts of this machine are made of high-quality parts from home and abroad. The equipment has high stability and low failure rate.
5, PLC programming control, high degree of automation. Photoelectric detection of raw materials to avoid errors and reduce waste.
6. High production efficiency, production speed is about 100 pieces / minute
1) Three layers of non-woven fabric materials are stacked together through a machine
2) Roll up and stitch the nose clip into it
3) Make a large piece of non-woven fabric gradually narrow from left to right along the slope to make a "folding structure"
4) Tableting: flatten the surface of the mask
5) Fully automatic single cutting and hemming of masks
6) Then use a non-woven fabric to trim the mask
7) Cut the edge again
8) Fix the hanging ear rope by hot pressing
9) Finally pass the quality inspection, sterilize and package the finished product
Contact Person: Lily Qiu