Payment & Shipping Terms:
|Product Name:||Ultrasonic Cutting Machine||Model Number::||HSQ40B-AB|
|Voltage:||220V / 110V||Handle:||Φ32×170|
|Length Of Cable:||3M||Outer Skin:||Aluminum|
|Material Of Blade:||Titanium Alloy, Stainless Steel||Generator:||Analog Generator, 155 X 265 X 170mm|
40Khz Ultrasonic Cutting Machine For Less Than 3mm Cutting Thinckness
Ultrasonic cutting machine is the use of wave energy for cutting equipment, the main t feature is not to use the traditional edge.
The traditional cutting utilizes a tool with a sharp edge to press the cutting material. The pressure is concentrated at the edge of the blade, the pressure is very large, more than the shear strength of the cutting material , then the material is cut open. As the material is cut by a strong pressure, so the cutting tool edge should be very sharp and the material itself has to bear the relatively large pressure. Therefore the cutting effect for the soft, flexible material is not good, especially more difficult for sticky material.
|Generator||Analog generator, 155 x 265 x 170mm|
|Size of cutter||Blade replaceable|
|Length of cable||3M|
|Voltage||220V / 110V|
|Accessory||Foot switch1pc；Cut blade 25pcs；1.5mm special hex wrench 1pc；
Screw M3×4L 2pcs
|Material of cutter||titanium alloy, stainless steel|
Typical materials processed
♦ Environment-friendly (No noise, no smoke, no air contamination)
♦ Smooth cutting of difficult-to-cut materials
♦ Small hand-held size(can be attached to automotive machinery arms)
♦ No special installation equipment
♦ The use of high power ultrasonic transducer vibrating element, ensure the long time stable working
♦ The cutting speed is improved greatly, the efficiency 10 times higher than the traditional cutting knife.
♦ Cutting all kinds of ordinary tool to cut products, solve production problems
♦ Can be installed high hardness blade, cutting blade can be replaced, greatly reducing the use cost
♦ Cutting tool complete varieties, can also be customized according to customer process shaped cutting tool
♦ Installation, easy to use, almost does not change the original cutting process
♦ Can be used in the production of circular ultrasonic tool cutting equipment, rolling cutting, suitable for cutting special
♦ Can use air-cooling, water-cooling design, adapt to various working conditions and environment
The following table presents the company tests for different material thickness, the recommended cutting speed data.
|Cutting Material||Thickness||Cutting speed|
|Asian gram force||2mm||3mm/s|
|Chloroprene rubber||5mm||Easy to cut|
|Corrugated paper||8mm||Easy to cut|
|Plywood||2.5mm||Easy to cut|
|Glass fiber resin||1.5mm||Easy to cut|
|Thick cardboard||1.5mm||Easy to cut|
|Linen||2mm||Easy to cut|
|Urethane||3mm||Easy to cut|
Easy to cut
1. What is the blade life?
The blade life differs according to material, shape of the work-piece, and processing method. The blade should be changed once every few months when cutting materials with small wear rates, such as rubber. The blade should be changed once every few days when cutting materials with large wear rates, such as materials containing glass fiber.
2. What is required for running and maintenance?
Blades, blade holders, and square-headed screws are expendables. The blade should be changed when it is broken or worn. We recommend changing the blade holder once every three months−two years, depending on usage. The blade attachment screw should be changed when the blade is changed, or at least once a month. For maintenance, the slit part of the blade holder should be cleaned when the blade in changed, and the oscillator filter should be cleaned once a month.
3. Is continuous use possible?
When general ultrasound processing tools are continuously used for a long period of time, heat accumulates in the transducer and the jointing section of the blade and results in malfunction. Altrasonic’s transducer can be continuously used for a long period of time by supplying air for cooling.
Contact Person: Hogo Lv