Send Message
Home News

company news about Ultrasonic plastic welding technology

Certification
China Hangzhou Altrasonic Technology Co., Ltd certification
Customer Reviews
The converters corresponding to your INVOICE NO. HS2015021 work very well. We would like to order more

—— Peter

I'm very happy with your good communication skills as well as follow up and good deal. I will definitely inform you my further program for further coo

—— Vinay

We tested it and it worked.  I will let you know about future purchases soon.

—— Alvin

Thank you! It is a pleasure, to work with a company that wants to make it right for the customer :) many times i deal with Chinese companies that do not care about the customer and long term business. I think I made the right decision going with you and Altrasonic !!!

—— Cameron

I'm Online Chat Now
Company News
Ultrasonic plastic welding technology
Latest company news about Ultrasonic plastic welding technology

The basic principle of ultrasonic welding is to use ultrasonic frequency mechanical vibration (frequency of 10-70 kHz, amplitude of 1-250 μm) to act on plastic parts to produce local heating under pressure (heating is due to the combination of surface and intermolecular friction). The result) and melting to form a weld. The ultrasonic welding process is divided into four stages.

 

Stage 1: The horn is in contact with the part, applying pressure and starting to vibrate. The frictional heat dissipates the energy guiding ribs, and the solution flows into the bonding surface. As the distance between the two parts decreases, the amount of welding (the distance between the two parts due to the flow of the melt) decreases. Initially the amount of welding displacement increases rapidly and then slows down as the molten energy guiding rib spreads and contacts the surface of the lower part. In the solid friction phase, heat is generated by the frictional energy between the two surfaces and the internal friction in the part. The frictional heat causes the polymer material to heat up to its melting point. The amount of heat is dependent on the frequency of action, amplitude and pressure.

 

Stage 2: An increase in the melting rate results in an increase in the amount of welding displacement and contact between the surfaces of the two parts. At this stage, a thin molten layer is formed, and the thickness of the molten layer is increased due to continuous heat generation. The heat at this stage is generated by viscous dissipation.

 

Stage 3:the thickness of the solution layer in the weld remains the same and accompanied by a constant temperature distribution, steady state melting occurs.

 

Stage 4: After a set period of time or after reaching a specific energy, power level or distance, the power supply is turned off, the ultrasonic vibration is stopped, and the fourth stage is started. The pressure is maintained and some of the extra solution is squeezed out of the joint. The maximum amount of displacement is reached when the weld is cooled and solidified, and intermolecular diffusion occurs.

latest company news about Ultrasonic plastic welding technology  0

 

Pub Time : 2019-10-18 14:34:50 >> News list
Contact Details
Hangzhou Altrasonic Technology Co., Ltd

Contact Person: Ms. Hogo Lv

Tel: 0086-15158107730

Fax: 86-571-88635972

Send your inquiry directly to us (0 / 3000)