Send Message
Home News

company news about Ultrasonic metal welding machine several common welding methods

Certification
China Hangzhou Altrasonic Technology Co., Ltd certification
Customer Reviews
The converters corresponding to your INVOICE NO. HS2015021 work very well. We would like to order more

—— Peter

I'm very happy with your good communication skills as well as follow up and good deal. I will definitely inform you my further program for further coo

—— Vinay

We tested it and it worked.  I will let you know about future purchases soon.

—— Alvin

Thank you! It is a pleasure, to work with a company that wants to make it right for the customer :) many times i deal with Chinese companies that do not care about the customer and long term business. I think I made the right decision going with you and Altrasonic !!!

—— Cameron

I'm Online Chat Now
Company News
Ultrasonic metal welding machine several common welding methods
Latest company news about Ultrasonic metal welding machine several common welding methods

Common metal ultrasonic welding machine can be divided into spot welding, ring welding, seam welding and wire welding

 

1, spot welding,

 

The vibration system of spot welder can be divided into longitudinal vibration system (light structure), bending vibration system (heavy structure) and light bending vibration system between them. Lightweight structure for small spot welder with power less than 500W. Heavy duty structure is suitable for kilowatt level high power ultrasonic welding machine. Light bending vibration system is suitable for small and medium power welding machine, which has many advantages of vibration system.

 

2, ring welding

 

Closed welds can be formed in one time by circular welding, using a torsional vibration system. During welding, when the pad is twisted, the amplitude of vibration is distributed in a symmetrical linear manner relative to the axis of the acoustic pole, the amplitude of the axis area is zero, and the amplitude of the edge of the pad is the largest. Ring welding is obviously the most suitable packaging technology for microelectronic devices. Sometimes girth welding is also used in the situation of straight line welding where the requirement of air tightness is particularly high. At this time, partial overlap girth welding method can be adopted to form seam welding to obtain continuous straight line welding. Because of the large area of girth welding, which requires large power input, multi-transducer drive mode is often adopted.

 

3, seam welding

 

The vibration system of the seam welding machine can be divided into the vibration state of the welding pad.

A) longitudinal vibration system;

B) bending vibration system;

C) torsional vibration system, etc.

A) and b) are commonly used. The vibration direction of the pad is perpendicular to the welding direction. The vibration direction of c) is parallel to the welding direction.

 

Seam welding can obtain a sealed continuous weld. Usually the workpiece is clamped between the upper and lower pads. Under special circumstances, the flat plate acoustic pole can be used.

 

4, line welding

 

Wire welding can be regarded as an extension of spot welding. It is now possible to obtain a 150mm long linear weld through a linear upper acoustic pole. This method is most suitable for linear sealing of foil.

Pub Time : 2021-01-07 10:56:27 >> News list
Contact Details
Hangzhou Altrasonic Technology Co., Ltd

Contact Person: Ms. Hogo Lv

Tel: 0086-15158107730

Fax: 86-571-88635972

Send your inquiry directly to us (0 / 3000)