Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
More information facilitates better communication.
Submitted successfully!
We will call you back soon!
Leave a Message
We will call you back soon!
Your message must be between 20-3,000 characters!
Please check your E-mail!
—— Peter
—— Vinay
—— Alvin
—— Cameron
The failure of the mask machine welding machine is not very obvious, because the welding machine is generally completed by light welding, and the power is small, and the damage is small, so the failure is not obvious during use.
DC motor troubleshooting, please note that before removing the DC motor brush-always put the brush back into the same hole of the motor. They provide surface contact due to wear. Typical inspections for troubleshooting or preventive maintenance of DC motor problems. The spring and brush are usually removed by removing the cover with a slotted screwdriver. Check the surface of the brush-it should be shiny or polished, which indicates good contact. Check the length of the brush.
Mask machine ultrasonic generator welding failure troubleshooting method after-sales service, so you don’t need to worry that the distance between the workpieces is a little too large and will affect the welding (generally, the distance can be welded between 3-5mm), which significantly improves the application function of welding. Range, reduce welding difficulty! In addition, due to the use of fiber lasers, the handheld fiber laser welding machine is easy to maintain, even without maintenance, as long as it is cleaned daily, there is no loss of consumables, and it is widely used in metals.