We all know that because the ultrasonic cutting knife uses the principle of ultrasonic to cut various materials, its cutting efficiency is high and the cutting edge is neat and smooth, and there will be no undesirable phenomenon of flying debris and loose tissue. However, because the ultrasonic wave emitted by the ultrasonic cutting knife has high energy during the cutting process, the operator should pay attention to the following things when using it.
1. Although the high-quality ultrasonic cutting knife has good protection, because of the high-voltage electric circuit inside the equipment, it is necessary to prepare a special power connector when using it to avoid danger, and the operator should not disassemble or modify without authorization Ultrasonic cutting knife to avoid accidental risks due to improper operation.
2. When using the ultrasonic cutting knife, the operator should be careful not to let the equipment come into contact with water, and when cleaning the ultrasonic cutting knife, also take care not to let water enter the inside of the cutting knife, so as to avoid short circuit and cause accidents. happened.
3. When using the industry's ultrasonic cutting knife, the blade part will gather a lot of ultrasonic energy, so be careful not to point the blade part to the human face or other body parts when operating, so as to avoid brewing due to improper control Into an accident.
4. When using an ultrasonic cutting knife, pay attention to the use of professional matching blades, instead of installing a non-ultrasonic cutting knife standard blade, to prevent the ultrasonic cutting knife from being unable to oscillate or reducing the cutting performance.
5. Cut off the power of the ultrasonic cutting knife in time after the end of the operation, and wait for the cutting knife to stop completely before removing the material debris or foreign matter remaining on the blade.
When using an ultrasonic cutting knife, the operator must pay attention to these things, because the ultrasonic cutting knife can gather strong ultrasonic energy, and there is a high-voltage electrical circuit inside the equipment, so if there is negligence during the operation, it is There will be certain risks, so in order to ensure safe production, the operator must pay more attention to the use of ultrasonic cutters.
Contact Person: Ms. Hogo Lv
Tel: 0086-15158107730
Fax: 86-571-88635972