company news about Automobile Coat Rack and Strip Ultrasonic Multi-head Welding Machine

Automobile Coat Rack and Strip Ultrasonic Multi-head Welding Machine

The automobile coat rack and the strip ultrasonic multi-head welding machine adopt ultrasonic welding, and the main body of the automobile coat rack is welded with the EPDM+PP strip by multi-point ultrasonic welding. Non-standard multi-head ultrasonic welding or hand-held ultrasonic welding machine.

The equipment has welding system, pneumatic system, circuit system and safety system. Multi-point ultrasonic welding uses non-standard equipment, and the welding effect is basically the same at all points, welding effect and welding method.

Hand-held ultrasonic welding machine welds the picture of the automobile coat rack sample. Because the hand-held ultrasonic welding machine is not uniform when the welding force is used, the molding of each point is different. Non-standard equipment will not encounter this problem.

Main functions of automobile coat rack and strip ultrasonic multi-head welding machine

The high-strength steel is used as the frame, and multiple welding heads are simultaneously pressed and welded, and the single welding head is controlled separately. Each ultrasonic wave adopts an air cooling device, and the limiting screw can adjust the height of the upper mold, and the upper mold is controlled by the cylinder. The movement of the board, PLC man-machine interface control, the side pull structure is convenient for debugging and installation, and the precision is high. The whole machine is easy to debug and has stable performance. The utility model can be adjusted at will, or it can be combined with semi-automatic or fully automatic production.

The pushing mechanism of the device can be divided into manual and automatic operation, and the manual is a single action, which is mainly used for debugging of the mechanism and the mold. The main operation screen is entered on the touch screen of the PLC computer, and the welding time, curing time, delay time, and air pressure value are set according to the welding requirements of the workpiece.

Press the computer touch screen to automatically determine, close the active door (the proximity switch indicator light is on) or the safety light barrier, and press the left and right buttons of the start switch (blue) with both hands. The process is fully controlled by PLC control. The upper die of the start switch presses the workpiece under pressure.

Production is automatic, and the automatic control system uses a programmable controller (PLC) to control and coherent movement of the cylinder. Simple operation, reliable performance and compact size improve production efficiency and quality.