|
Product Details:
|
| Frequency: | 40Khz | Material: | Titanium |
|---|---|---|---|
| Blade: | 82MM | Power: | 500W |
| Input: | AC110-240 | Power Controller: | Stepping Or Continuous |
| High Light: | ultrasonic cutting knife,ultrasonic cutting devices |
||
No Sweat Cutting 40 Khz Ultrasonic Cutting Machine With Stainless Steel Cutting Head High Quality
Description:
Ultrasonic cutting machine is an ultrasonic device specially used for cutting, which is one of the important categories of ultrasonic applications.
The principle is completely different from traditional cutting. The ultrasonic cutting machine utilizes the energy of the ultrasonic wave to melt the local heating of the material to be cut, thereby achieving the purpose of cutting the material.
The difference between traditional cutting and ultrasonic cutting:
Ultrasonic cutting machine is the use of wave energy for cutting equipment, the main t feature is not to use the traditional edge.
The traditional cutting utilizes a tool with a sharp edge to press the cutting material. The pressure is concentrated at the edge of the blade, the pressure is very large, more than the shear strength of the cutting material , then the material is cut open. As the material is cut by a strong pressure, so the cutting tool edge should be very sharp and the material itself has to bear the relatively large pressure. Therefore the cutting effect for the soft, flexible material is not good, especially more difficult for sticky material.
Ultrasonic cutting advantage and features:
1. Cut the material quickly and precisely
2. Smooth and traceless cutting edge
3. Powerful, effective realiable
4. Low cost, easy operator. An operator only handle the probe and step the foot switch .So anybody can use it easily.
|
FREQUENCY |
40Khz |
|
POWER |
500W 800W |
|
INPUT |
AC110-240V, 50/60Hz |
|
POWER CONTROLLER |
stepping or continuous |
|
MATERIAL OF CUTTING HEAD |
aluminum alloy, stainless steel, titanium alloy, alloy steel. |
|
MACHINE WIGHT |
4 kg-16KG |
|
ACCESSORIES |
foot switch, additional blade |
|
COOLING DEVICE |
compressed air mouth can be installed. |
|
CABLE LENGTH |
2M or customized |
|
FOOT SWITCH |
available |
Applications:
1. For thermal plastic gate cutting and flush cutting.
2. For non-woven or woven cutting,textile cutting, fabric cutter, curtain cutting,window blind fabric
3. For rubber, PVC, leather plastic, cardboard, acrylic, polyprolene and so on cutting.
4. For tape and film cutting .
5. For paper cutting,printing industry cutting.
6. For package material cutting
7. For the automotive industry cutting
No Sweat Cutting 40 Khz Ultrasonic Cutting Machine With Stainless Steel Cutting Head High Quality
Contact Person: Hogo Lv
Tel: 0086-15158107730
Fax: 86-571-88635972
